How To Paint A Car Part
Preparing
Start cleaning the surface with wax and grease remover with a lint free cloth, so lightly scuff the surface with scotch rite or 600 grit sand paper. Be certain to scuff all areas and all reflexive areas will appear dull and then use wax and grease remover on the surface once again.
NOTE: For best results, remove parts off the vehicle if possible.
Primer
If part has been removed, secure the function in a location so you tin pigment without having to handle it, if not mask up areas that do non demand painting.
Shake plastic primer filler as per instructions, lay down 2 coats at five minutes apart.
After 40 minutes drying time, lightly sand surface with 800 dust sandpaper to smooth the shape of the part.
Paint
Wipe down the part with wax and grease remover using a lint gratis fabric, shake Basecoat spray tin can as per instructions. Test spray on paper to ensure even spray and no spiting.
Lightly spray base coat onto part no closer than 20cm abroad from function and utilise l% overlay when painting to ensure best coverage results.
Lay down three medium coats with 15 minutes dry time between coats.
Clear
Shake Clear coat spray can every bit per instructions. Test spray on paper to ensure even spray and no spiting.
Lightly spray base coat onto part no closer than 20cm abroad from part, use l% overlay when painting to ensure best coverage results.
Lay down 3 medium coats with 20 minutes dry fourth dimension between coats.
Requite the articulate coat a good 24 hours to dry completely.
NOTE: For superior high gloss results, you tin utilise a cut a polish for desired outcome.
Source: https://www.supercheapauto.com.au/blog/how-to/paint-body-repair/how-to-paint-plastic-car-parts.html
Posted by: dancystook1969.blogspot.com
0 Response to "How To Paint A Car Part"
Post a Comment